Guida setup gratuita
Guide setup / Assetto Corsa Evo / Mazda MX-5 (ND) Cup — ND2 Sequential @ Monza

Mazda MX-5 (ND) Cup — ND2 Sequential

Monza · Assetto Corsa Evo · Aggiornato ott 4, 2026
Genera la tua variante
// Hot Lap · Dry

TYRES

  • Compound: Soft Slick (Cup spec)
  • Front Pressure: 27.0 PSI
  • Rear Pressure: 27.5 PSI
  • Optimal Operating Temp: 85–95°C
  • No tyre blankets available in AC Evo — build temps over out-lap with weaving and brake applications.
  • Camber Front: -3.6°
  • Camber Rear: -2.4°
  • Toe Front: -0.05° (slight toe-out)
  • Toe Rear: +0.15° (toe-in)

ELECTRONICS

  • TC: 1 (minimal, for Parabolica/Lesmo exit only)
  • ABS: 2
  • Engine Braking / Brake Magic: Medium-High (6/10)
  • Brake Bias: see SUSPENSION

SUSPENSION

  • // FRONT
  • Ride Height: 75 mm
  • Wheel Rate FL / FR: 32500 N/m / 32500 N/m
  • ARB: 6 N/mm
  • Brake Torque Multiplier: 100%
  • Brake Bias: 62%
  • // REAR
  • Ride Height: 78 mm
  • Wheel Rate RL / RR: 28000 N/m / 28000 N/m
  • ARB: 4 N/mm
  • Diff Preload: 35 Nm
  • Diff Coast: 0.45
  • Diff Power: 0.60

DAMPERS

Slow BumpSlow ReboundFast BumpFast Rebound
FL4200580021002900
FR4200580021002900
RL3800520019002600
RR3800520019002600

AERO

  • Front Splitter: minimum (stock, no adjustment available)
  • Rear Wing: lowest angle setting available (min drag priority)
  • Downforce Level: minimum — Monza is a top-speed track, MX-5 has negligible aero but reduce any drag-inducing elements
  • Brake Ducts: N/A (not adjustable on this car)

KEY SETUP NOTE

  • The ND2 Cup has so little power that minimizing drag and carrying min-speed through the chicanes matters more than outright mechanical grip — every tenth lost to understeer at Ascari or scrubbed speed at the chicanes is unrecoverable on the straights, so bias the setup toward rotation (softer front ARB relative to rear, slightly higher rear pressure) rather than ultimate stability.

TRACK GUIDE

  • T1/2 (Rettifilo): Brake as late as physically possible in a straight line — trail brake slightly to rotate the car into the first apex, use full kerb on exit of T2, car is light enough to ride it aggressively.
  • T3 (Curva Grande): Flat or near-flat in top gear — commit early, this is a confidence corner, any lift costs massive time down to T4.
  • T4/5 (Roggia): Second heavy brake zone — brake slightly earlier than feels natural since the car is light and rear can snap under trail-braking; prioritize a clean, early exit over late apex aggression for T6/7 run.
  • Lesmo 1/2: Lesmo 1 rewards late apex and trust in front grip; Lesmo 2 is where lap time is won — sacrifice Lesmo 1 exit slightly to maximize Lesmo 2 min-speed, since it feeds the longest straight on track.
  • Ascari Chicane: Treat as flowing S rather than two separate corners — stay on the kerbs flat, minimal steering corre
Ti servono condizioni diverse?

Questa guida è stata generata dal nostro ingegnere setup IA. Ottieni un setup nuovo per la tua sessione esatta, bagnato o asciutto, hotlap o distanza gara, in circa 20 secondi. I primi 3 setup sono gratis, senza bisogno di un account.

Guida con questo setup e un coach in radio

Il TheTenths Client gratuito funziona con Assetto Corsa Evo: mentre guidi registra ogni giro valido in classifica e ti mette in radio un coach IA che chiama i punti di frenata e coglie gli errori curva per curva.

Altri setup a Monza

Dallara EXP
Monza
Assetto Corsa Evo Vedi setup →
Ferrari 488 Challenge Evo
Monza
Assetto Corsa Evo Vedi setup →
Mini John Cooper S MK IV
Monza
Assetto Corsa Evo Vedi setup →
Porsche 911 GT3 RS (992)
Monza
Assetto Corsa Evo Vedi setup →
Porsche 911 Turbo 3.6 (964)
Monza
Assetto Corsa Evo Vedi setup →

Monza in altri sim

BMW M4 GT3 (2021)
Monza
Assetto Corsa Competizione Vedi setup →
Ferrari 296 GT3
Monza
Assetto Corsa Competizione Vedi setup →
Lexus RC F GT3 (2016)
Monza
Assetto Corsa Competizione Vedi setup →
McLaren 650S GT3 (2018)
Monza
Assetto Corsa Competizione Vedi setup →
McLaren 720S GT3 (2019)
Monza
Assetto Corsa Competizione Vedi setup →
McLaren 720S GT3 Evo
Monza
Assetto Corsa Competizione Vedi setup →